Trench Drain Grate With Welded Frame. Pedestrian Traffic. Type: FSR
Fotskraperist med sveist ramme. Vinkler er påmontert tre av rammens sider. Vinklene kan flyttes eller demonteres etter eget ønske på byggeplass. Gangtrafikk.
Varianter
| Article name | NRF | Light opening | Exterior frame dimensions | Finish | Material | Weight | Antall | Legg i liste |
|---|---|---|---|---|---|---|---|---|
| Article name: FSR1206 | NRF: Fotskraperist | Light opening: 1220 mm x 623 mm | Exterior frame dimensions: 1320 mm x 723 mm | Finish: Hot-dip galvanized | Material: Steel | Weight: 33 kg |
Description
Trench drain grate designed in collaboration with contractors to enable an early placement of a trench drain grate – to ensure a cleaner indoor climate during the construction period.
The trench drain grate is delivered with a welded frame. The frame has mounted angles for stability on a compressed crushed stone cushion outside the entrance. Several frames can be fastened together if larger gratings are needed. In stock in standard dimension 1200 mm x 600 mm.
Grate has a mesh size of 30×10 mm and is angular.
Load is pedestrian traffic.
Related products
-
Manhole Cover In Cast Floors. Aluminum. Type: KM
Manhole cover in aluminum for passenger traffic.
-
Manhole Cover in Steel. Type: BVS-400
Manhole cover in steel for heavy traffic. Used in buildings or in areas where extra load-bearing manhole covers are a requirement. Tested with 400 kN according to EN124.
-
Manhole Cover For Vinyl Flooring. Type: KB
Manhole cover for recessing floor coverings. Passenger traffic.
-
Waterproof Manhole Cover. Aluminum. Type: RVA
Waterproof manhole cover with non-slip surface. Lid of 3 or 5 mm non-slip aluminum plate with reinforcement on the underside. Lid screwed to frame.
-
Aluminum Duct Lid. Special Measurements. Type: BVA-RA
Almost waterproof duct lid in aluminum. Tested with 125 kN according to EN 124.
Special measurements. Can cover any length. -
Low-profile Manhole Lid in Aluminum. Type: BVA-SL
Low-profile waterproof manhole lid for concrete casting. Total height 50 mm.
14 mm is set aside for laying the floor surface: Tiles, parquet or similar. -
Aluminum Slatted Lid With Different Equipment Grades. Type: KLF
Slatted hatch for treatment plants, pumping stations, waterworks, or similar.
A very well equipped special hatch. -
Dome for access to underlying installations and processes. Type: KLG
Dome solution for technical installations and treatment plants where the need for inspection and supervision is desirable.
-
Manhole Cover in Steel. Type: BV-GDZ
Hinged manhole cover in steel. Can be opened from both the bottom and top.
Easy-to-operate, waterproof manhole cover with gas cylinder and lid holder. For car traffic -
Manhole cover in aluminum with composite. Type: CLA
Used in buildings where only pedestrian traffic is expected, where requirements are set for simple inspection and that the lid is waterproof and light.
-
Manhole Cover in Steel. Type: BVS-250
Manhole cover in steel for heavier traffic. Especially suitable in warehouses and on loading/unloading areas where forklifts are used. Tested with 250 kN according to EN 124.
-
Manhole Cover in Stainless Steel. Hygienic. Type: BVE
Well suited for use in commercial kitchens, meat processing areas, dairies, swimming facilities, and hospitals, where the hygienic properties of stainless steel are preferred.
-
Waterproof Manhole Cover. Stainless Steel. Type: RVE
Waterproof manhole cover. Stainless steel. Reinforced inspection cover adapted to buildings or in outdoor areas where stainless steel design is required.
-
Manhole Cover in Steel/Stainless steel. Type: BV SL/ BVE SL
Manhole cover in steel/stainless steel. Low-rise, total height 50 mm. For passenger traffic.
BV SL = Steel. BVE SL = Stainless steel. -
Galvanized And Stainless Steel Trench Drain Grates
We supply all types of gratings in stainless, galvanized steel.
-
Manhole Cover in Steel. Type: RG
Manhole cover in steel for passenger traffic.
As a lid over surface water, valves, and the like where tightness is not necessary. -
Low Manhole Cover In Aluminum With Composite. For Leveling Layers. Type: CLA-SL
Low manhole cover in aluminum with composite. For leveling layers. Total height only 50 mm.
-
Manhole Cover In Aluminum With Composite. Type: CCA-GD
Manhole cover in aluminum with composite.
With hinges, lifting cylinders, and lid holder. -
Manhole Cover in Steel With Gasket. Type: BV
Used in buildings or in areas where watertight manhole covers are a requirement, or where slow-moving traffic with up to 3-ton wheel pressure takes place.
-
Hinged Manhole Cover in Aluminum With Composite. Type: CCA
Manhole cover in aluminum, with composite. Low weight.
With hinges and lid holder.
