Manhole Cover in Steel. Hinged. Type: BVH-GD MAXI
Hinged manhole cover in steel for recessing paving stones.
Especially suitable for areas where concrete slabs, cobblestones, or tiles are to be used.
Varianter
| Artikkelnavn | NRF | Utsparing | Lysåpning | Vekt | Antall | Legg i liste |
|---|---|---|---|---|---|---|
| BVH-GD MAXI 55 | 000-000 | 65 x 65 | 50 x 50 | 40.0 kg | ||
| BVH-GD MAXI 66 | 000-000 | 75 x 75 | 60 x 60 | 52.0 kg | ||
| BVH-GD MAXI 88 | 000-000 | 95 x 95 | 80 x 80 | 64.0 kg | ||
| BVH-GD MAXI 106 | 000-000 | 115 x 75 | 100 x 60 | 65.0 kg |
Description
10 cm deep, waterproof manhole cover with hinges and gas cylinders, for filling the cobblestones.
Depth: 102 mm. Installation height: 125 mm.
Load:
125 kN according to EN 124 when filled with min. 5 cm concrete C35/45.
Applications:
• Used in buildings or in areas where watertight and load-bearing manhole covers are a requirement.
• Especially suitable for areas where concrete slabs, cobblestones, or tiles are to be used.
Materials:
• Frame and lid in cold-pressed precision steel profile.
• EPDM gasket.
• Steel lattice reinforcements.
• High-load steel hinges.
Operation:
• Lifting keys included with all lids.
• Locked lid is easily opened with the included golden key.
• Lid holder secures the lid in the open position.
Assembly:
• The installation must be carried out in accordance with the enclosed installation instructions.
• The outside of the frame must be sealed to the floor.
(Use concrete with waterproofing additive).
General information:
• Smart design that easily allows inspection.
• The construction helps ensure that when the manhole cover is correctly installed and covered with the correct floor covering, it is virtually invisible.
• All lids come with a complete set of opening tools.
• All standard lids are protected with cardboard corners. These provide adequate protection during transport. The corners are clearly marked with the lid size and type to simplify the controls both in the warehouse and on the construction site.
• We guarantee that our standard lids, if they are completely filled with concrete C35/45 EN 206, will satisfy the specified load test.
• If tiles are used, the lid will withstand a slightly lighter load.
Related products
-
Hatch-lifter. Type: BHL-26
Hatch lifts that fit all our hatches for filling concrete.
-
Manhole Cover in Steel. Type: BVHS
Manhole cover in steel for loads 250kN or 400kN.
-
Manhole cover in aluminum with composite. Type: CLA
Used in buildings where only pedestrian traffic is expected, where requirements are set for simple inspection and that the lid is waterproof and light.
-
Manhole Cover in Steel With Gasket. Type: BV
Used in buildings or in areas where watertight manhole covers are a requirement, or where slow-moving traffic with up to 3-ton wheel pressure takes place.