Waterproof Manhole Cover in Steel. Isolated. Type: BV TERMO

Waterproof manhole cover with insulation for concrete casting.
Tested with 125 kN according to EN 124.

SKU: N/A Categories: ,


ArtikkelnavnUtsparingLysåpningVektAntallLegg i liste
BV TERMO 5563,5 x 63,550 x 5019.0 kg
BV TERMO 6673,5 x 73,560 x 6023.0 kg
BV TERMO 8693,5 x 73,580 x 6029.0 kg
BV TERMO 8893,5 x 93,580 x 8033.0 kg
BV TERMO 106113,5 x 73,5100 x 6033.0 kg
BV TERMO 110113,5 x 113,5100 x 10045.0 kg
BVA TERMO 5562 x 6250 x 5010.0 kg
BVA TERMO 6672 x 7260 x 6012.0 kg
BVA TERMO 8692 x 7280 x 6014.0 kg
BVA TERMO 8892 x 9280 x 8017.0 kg
BVA TERMO 106112 x 72100 x 6017.0 kg
BVA TERMO 110112 x 112100 x 10026.0 kg


Waterproof manhole cover with insulated insulation for concrete casting.

Depth: 52 mm. Installation height: 75 mm.

Tested with 125 kN according to EN 124

Inside buildings, or in areas with pedestrian traffic, where insulated and/or waterproof lids are required.

• Frame and lid in 2 mm cold-pressed precision steel profile.
• Hot-dip galvanized.
• EPDM gasket
• Steel lattice reinforcement.
• Polyurethane insulation board covered with aluminum sheets on both sides.

• Lifting keys included with all lids.
• Locked lid is easily opened with the included golden key.

• The installation must be carried out in accordance with the enclosed installation instructions.
• The outside of the frame must be sealed to the floor.

(Use concrete with a waterproofing additive.)

General information:
• Smart design that easily allows inspection.
• The construction helps ensure that when the manhole cover is correctly installed and covered with the correct floor covering, it is virtually invisible.
• All lids come with a complete set of opening tools.
• All standard lids are protected with cardboard corners. These provide adequate protection during transport. The corners are clearly marked with the lid size and type to simplify the controls both in the warehouse and on the construction site.
• We guarantee that our standard lids, if they are completely filled with concrete C35/45 EN 206, will satisfy the specified load test.
• If tiles are used, the lid will withstand a slightly lighter load.