Joint, XV. Type: XVT
Joint for XV. Galvanized and acid-proof.
Varianter
| Article name | NRF | Execution | Length | Antall | Legg i liste |
|---|---|---|---|---|---|
| Article name: XVT400DSA | NRF: XVT | Execution: Galvanized | Length: 400 mm | ||
| Article name: XVT400A4DSA | NRF: 3351107 | Execution: Acid resistant | Length: 400 mm | ||
| Article name: XVT400DSAH | NRF: 3351108 | Execution: Galvanized | Length: 400 mm | ||
| Article name: XVT400A4DSAH | NRF: 3351109 | Execution: Acid resistant | Length: 400 mm |
Description
Joint for retrofitting in cases where the buried spindle extension is selected too short or where terrain adjustments exceed the spindle length.
All joints can be easily mounted without cutting or dismantling the existing spindle.
The telescopic function of the spindle works in the same way after mounting as before mounting.
Many fitters have used a longer spindle extension than necessary. This is to be absolutely sure that the extension should not be too short.
Helnor joint removes the need for this safety margin.
Standard lengths 400 mm, special lengths are made on request.
Type XVT is adapted:
Spindle extensions type XV, XVA, XVB etc.
Accessories
-
Control Key For Spindle Extensions XV. Type: XN2
T-wrench with replaceable sleeves for spindle top with square dimensions 19 mm and 27 mm.
Used for valves larger than DN 63, DN 63-500. Made of galvanized steel. -
Helnor Street Box Composite. Type: XB190
Helnor street box in composite. Low weight.
-
Square Street Box In Ductile Iron. Type: XB185H
Square street box in ductile iron. Specially designed for laying in cobblestone areas.
-
Double Street Box, Square. Type: XBD185H
Used when you want to link control of water and drainage in one and the same street box.
Related products
-
Telescopic Repair Kit For Spindle Extension XO. Type: XOT270RT
XOT telescopic repair kit for spindle extension for ground crane.
The repair kit has about 10 cm telescopic capacity. -
Spindle Extension Control Key XK And XO. Type: XN1
L-shaped key with suspension eye for operating spindle extensions type XK and XO.
Made of galvanized steel. -
Control Key For Spindle Extensions XK And XO. Type: XN3
U-shaped key with pointed tip for opening the gate box.
Fits spindle extensions with internal square holes 16×16 mm.
Made of galvanized steel. -
Repair Kit, XO. Type: XOT120R
Repair kit for XO.
The repair kit can be used on all Helnor spindle extensions for ground cranes. -
XKT120R – Repair Kit For Telescopic Spindle Extension XK
Repair kit for XK (plastic top)
-
Spindle Extension Control Key XS Type: XN3H
U-shaped key with sleeve and pointed tip for opening the street box.
For spindle extensions with protruding spindle (XS) with square dimensions 11 mm, as well as XO/XK. -
Joint, XS. Type: XST
Joint for XS
-
XoT120 – Splice Extension Spindle Extension XO
If adjusting the ground level makes the spindle extension too short, simply attach the Helnor joint. Galvanized or acid-proof. Special lengths to order.
