Inspection Hatch With Square Lock. Type: UP-SLF

Inspection hatch with square lock for use in the ceiling and wall.

Used in gypsum board and concrete wall/ceiling for:

• Quick access to pipes, fittings, valves, and electrical connections.

• The frame has an 18 mm surface-mounted flange that will hide any unevenness in the recess.

Varnishing:

• White, powder coated RAL 9016.

• Other RAL colors can be supplied at an additional cost.
This applies to a number of 10 hatches or more.

Materials:

• Galvanized steel in frame and lid.

• Supplied control key in PP.

Insulation:
The hatch is delivered uninsulated.

Operation:
Opening and closing takes place by 90 º turning with the key.

Assembly:

• Perpendicular holes are cut in the wall/ceiling according to the recess dimensions in the table.

• To ensure good sealing between the flange and the wall surface, it is recommended to lay a string of sealant ACRYL-1A on the frame flange itself before installing the frame.

• Wooden or steel posts are used on a minimum of two sides of the frame.

• 4 pcs (2 pcs for size 150) anchor for fastening the frame is pre-drilled with 5 pcs holes. The anchors are rotated 90 ° out of the frame and fastened to posts.

• In concrete constructions, expansion bolts must be used for fastening the frame.

• There is no need to line the opening, but good sealing must be ensured between the concrete and the frame.

• Installation instructions are included with each individual hatch.

Recess dimensions are 5 mm larger than frame dimensions. Insert in wall is 25 mm.

Light opening = Final opening with installed hatch.