Our Products
Showing 169–196 of 214 results
-
Check Valve In Basin. Type: ZK-K
Check valve in straight-line foam.
Easy installation and very easy maintenance. Delivered without riser. -
Balcony Hatch With Ladder. Type: HBS- EI60/120
Lightweight, easy-to-use balcony lid with fold-down ladder for easy evacuation to the floor below. With hinges and lifting handles.
-
Check Valve. Type: ZK-UZBBW
For installation inside the pipe outlet in existing concrete troughs.
Installed in DEEP wells/troughs. Ø110-Ø160. -
Recessed Lid
Recessed lids for loads from 125kN to 900kN.
Used if there are requirements for motorized, hydraulic, or other form of lifting automation. -
Check Valve. Type: ZK-UZBB
For installation inside the pipe outlet in existing concrete troughs.
Installed only in GROUND wells/troughs. Ø110-Ø160. -
Check Valve. Type: ZK-UZBKW
For installation inside PP/PVC troughs.
Self-closing flap and comes with sleeve. Ø110-Ø200. -
Lid With Rubber Cuff. Special Composite. Type: ZK-PS 355/400
The lids are used as a finish above the ground, either directly on the riser with sleeve or on the telescopic upper part. Ø355 corrugated pipe. Ø400 smooth pipe. 3h axle load.
-
Strong Manhole Cover. Aluminum. Type: KMS
Manhole cover for use in cast floors with pedestrian and light corridor traffic.
-
Check Valve, 1 Flap. Type: ZK-ZB
Check valve consisting of valve housing with simple lockable flap.
Manual locking. Ø110-Ø315. -
Check Valve. Type: ZK-ZBK
Tilbakeslagsklaff bestående av selvlukkende klaff. Rødbrun PP (polypropylen). Ø110-Ø315.
-
Check Valve, PVC. Type: SEK
Simple check valve in PVC for spring floods and floods.
Ø250-Ø630. -
Drain Flap For Drain. Type: ZK-ZBKDR
Check valve consisting of a simple self-closing flap.
Comes with sleeve with the unique locking system. Ø72-Ø100. -
Check Valve, 2-Flap. Type: SET OTTIMA
Check valve, 2-flap. Horizontal mounting.
Ø110-Ø160. -
Vertical Check Valve. Type: ZK-ZBPION
Vertical check valve. Valve body with a simple lockable flap.
With manual locking. Ø50-Ø100. -
Check Valve Ø50. Type: ZK-ZB50.
Check valves consisting of valve housing with simple lockable flap.
Manual locking. Ø50. Mounted horizontally. -
Check Valve, For Installation In The Floor. Type: ZK-PZB
For installation in the floor.
Consisting of self-closing flap and is mounted in unit with socket in inlet and outlet. Ø160-Ø200. -
Check Valve, 1-Flap. Type: SET
Check valve, 1-flap.
Horizontal mounting. Ø200-Ø400. -
Stakerør. Type: SES
Stakepunkt med firkantluke. Ø110-Ø200
Godt egnet som bruk ved behov for stor åpning, kameraføring etc. -
Standard Lid. Special Composite. Type: ZK-P
The lids are used as a finish over the sump.
Can be used directly on both smooth and corrugated risers. -
Leaf collector. Type: ZK-U
The branch pipe is used as a leaf collector for roof downspouts.
Prevents leaves and twigs from entering the drain line. Ø110-Ø160. -
Awadock tilkobling mot plastrør. Type: APP
Med Awadock APP kan rør av PP/PVC/PE tilkobles til glattveggede rør av PP/PE/PVC/GRP. Enkel tilkobling for bruk både på nye anlegg
og eksisterende rør. Rørdelen finnes med DN200-tilkobling fra DN250-1400 og med DN160-tilkobling fra DN200-1400. -
Awadock tilkobling mot betongrør. Type APB
Med Awadock APB kan rør av PP/PVC/PE, støpejern og teglstein tilkobles til rør, kummer eller plane flater av betong.
Enkel tilkobling for bruk på både nye anlegg og eksisterende rør.
-
Awadock tilkobling mot dobbeltveggede rør. Type: APDV
Med Awadock APDV kan rør av PP/PVC/PE tilkobles til korrugerte og dobbelveggede rør med glatt innside fra DN300–1200. Med 3 typer av awadock APDV vil man dekke alle tilkoblinger DN160/300–DN800 og DN200/800–DN1200. Enkel tilkobling for bruk både på nye og gamle rør.
-
Awadock kumgjennomføring. Type: ABKUM
Awadock ABKUM er for gjennomføring eller tilkobling av glatte rør mot betongkummer.
Tilkoblingsrør DN160, DN200 eller DN150 (innvendig, DN186 utvendig).
-
Verktøy Awadock
Verktøy for Awadock APP (plast), APB (betong) og APDV (dobbeltveggede rør).
Hullsag, monteringsnøkler, borstativ.
-
Fire Hydrant Well Complete. Type: BAD
Complete fire hydrant in well.
-
Flushing Post Well Complete. Type: BBD
Complete flushing post in well.
-
Manhole Cover in Ductile Iron. For Fire Hydrant. Type: BAE1
Manhole cover in ductile iron for fire hydrant. With frame.
