Telescopic Repair Kit For Spindle Extension XO. Type: XOT270RT
XOT telescopic repair kit for spindle extension for ground crane.
The repair kit has about 10 cm telescopic capacity.
Varianter
| Article name | NRF | Weight | Antall | Legg i liste |
|---|---|---|---|---|
| Article name: 3351616 | NRF: XOT270RT | Weight: 1.0 kg |
Description
Repair kit for retrofitting and repair. The repair kit has about 10 cm telescopic capacity.
The repair kit has two uses:
1) Repair when the spindle extension is damaged at the top from, for example, a collision, excavator bucket, or other external influences.
2) Reduction of length of spindle extension – in those cases where a spindle extension that is too long is fitted.
The repair kit is mounted by cutting off 1) damaged area or 2) cutting so that the desired height is achieved.
Assembly video
Accessories
-
Spindle Extension Control Key XS Type: XN3H
U-shaped key with sleeve and pointed tip for opening the street box.
For spindle extensions with protruding spindle (XS) with square dimensions 11 mm, as well as XO/XK. -
Double Street Box, Square. Type: XBD185H
Used when you want to link control of water and drainage in one and the same street box.
-
Square Street Box In Ductile Iron. Type: XB185H
Square street box in ductile iron. Specially designed for laying in cobblestone areas.
-
Control Key For Spindle Extensions XK And XO. Type: XN3
U-shaped key with pointed tip for opening the gate box.
Fits spindle extensions with internal square holes 16×16 mm.
Made of galvanized steel.
Related products
-
XoT120 – Splice Extension Spindle Extension XO
If adjusting the ground level makes the spindle extension too short, simply attach the Helnor joint. Galvanized or acid-proof. Special lengths to order.
-
XKT120R – Repair Kit For Telescopic Spindle Extension XK
Repair kit for XK (plastic top)
-
Joint, XS. Type: XST
Joint for XS
-
Joint, XV. Type: XVT
Joint for XV. Galvanized and acid-proof.
-
Repair Kit, XO. Type: XOT120R
Repair kit for XO.
The repair kit can be used on all Helnor spindle extensions for ground cranes. -
Control Key For Spindle Extensions XV. Type: XN2
T-wrench with replaceable sleeves for spindle top with square dimensions 19 mm and 27 mm.
Used for valves larger than DN 63, DN 63-500. Made of galvanized steel.
